Breathing Gas Dive Compressors, High Pressure Diving Air Compressor, Coltrisub, Coltri Sub, Portable, Single Phase Electric, Petrol, Three Phase, Pembrokeshire, West Wales, UK

Breathing Gas Dive Compressor, High Pressure Diving Air Compressors, Coltrisub, Coltri Sub, Portable, Single Phase Electric, Petrol, Pembrokeshire, Three Phase, West Wales, UK

Breathing Gas Dive Compressor, High Pressure Diving Air Compressors, Coltrisub, Coltri Sub, Portable, Single Phase Electric, Petrol, Pembrokeshire, Three Phase, West Wales, UK

PADI dive centre; scuba diver training, diving equipment, dive charter.

Home
Boat Charter
Equipment Sales

     ABC's
    
Boats
     Wet/Semi-Dry Suits
     Fourth Element

     Drysuits
     Regulators
     Cylinders
     BCD's
     Instruments
     Dive Watches
     Computers
     Compressors
     Package Deals
     Underwater Cameras

PADI Diver Training
BSAC Diver Training
Schedules
Local Dive Sites
Accommodation
Equipment Servicing
Air Fills
Gift Vouchers
Special Offers
Pricelist
Contact/Enquiry
News
The Crew
Recommendations
Feature Archive
Where We Are
Links

Celtic Diving Base
Goodwick Parrog,
Pembrokeshire, 
West Wales
 
SA64 0DE

Tel:  01348 871938
Mob:07816 640684

 

Opening Times

   Compressors...


Coltrisub Compressors; both smaller and larger models available, reliable, economical and competitively priced with readily available service consumables and spares.

Prices quoted do not include VAT or shipping.
 

MCH 6/EM - 2.8 cfm Single Phase Electric
Light and easy to handle, technically advanced, but simple and economical to use. These features mean that you can use this motor driven compressor even in your own home.

MCH 6/EM - 2.8 cfm Single Phase Electric











 

 

 



 

  • Charging rate : 80l/min - 6m3/h - 2.8 cfm
  • Filling time cylinder : 10 L - 0-200 Bar 25 min
  • Working pressure : 225 Bar 3200 psi / 300 Bar 4300 psi
  • Rpm pumping unit : 2240
  • Driven by : Single phase electric motor
  • Power : 2,2 Kw - 3 HP
  • Rpm Motor : 2800 (230 V - 50 Hz) 3400 (230 V - 60 Hz / 115 V - 60 Hz)
  • Full load amps : 14 A (230 V - 50 Hz / 230 V - 60 Hz) 29 A (115 V - 60 Hz)
  • Measurements : H 36cm x L 65cm x W 38cm
  • Weight : 57,1 KG
  • Noise Level : 81.7 dB - ISO 3746
  • Number of stages : 4
  • Number of cylinders : 4
  • Lubricating oil capacity : 300 cc (0.3 L) / 10,1 FL. OZ
  • Lubricant : Airtek CE 755 synthetic lubricant
  • Frame : Powder coated steel
  • Oil/Moisture separator : After last stage
  • Filtration : Filter cartridge active carbon and molecular sieve
  • Safety valve : On the separator housing
  • Interstage coolers and after coolers : Stainless steel
  • Breathing Air : DIN 3188 EN12021 CGA E
  • Also available in stainless steel

1,789.- + VAT


MCH 6/EM Compact - 2.8 cfm Single Phase Electric
MCH 6/EM Compact - 2.8 cfm Single Phase Electric

  • Charging rate - 80l/min - 6m3/h - 2.8 cfm
  • Driven by - Single phase electric motor
  • Working pressure - 225 bar 3200 psi/ 330 bar 4300 psi
  • Noise Level - 81.7 dB - ISO 3746
  • Weight - 57.1 KG
  • Measurements - H 36cm x L 65cm x W 35cm
  • Also available in Stainless Steel

1,799.- + VAT


MCH 6/SH - 3.5 cfm Honda Petrol
The compact dimensions and light weight of this petrol driven compressor make it very easy to transport. It is an extremely reliable unit and is ideal for filling cylinders on land or in boats.

MCH 6/SH - 3.5 cfm Honda Petrol








 
  • Charging rate : 100l/min - 6m3/h - 3.5 cfm
  • Filling time cylinder : 10 L - 0-200 Bar 20 min
  • Working pressure : 225 Bar 3200 psi / 300 Bar 4300 psi
  • Rpm pumping unit : 2800
  • Driven by : Honda petrol engine
  • Power : 4 Kw - 5,5 HP @ 3600 giri/min - rpm
  • Fuel consumption : 0,987 L/h / 1,04 quarts/hour
  • Measurements : H 36cm x L 75cm x W 32cm
  • Weight : 37 KG
  • Noise Level : 87 dB - ISO 3746
  • Number of stages : 4
  • Number of cylinders : 4
  • Fuel : Unleaded petrol
  • Fuel tank capacity : 2,7 L / 2,85 quarts
  • Lubricating oil capacity : 300 cc (0.3 L) / 10,1 FL. OZ
  • Lubricant : Airtek CE 755 synthetic lubricant
  • Frame : Powder coated steel
  • Oil/Moisture separator : After last stage
  • Filtration : Filter cartridge active carbon and molecular sieve
  • Safety valve : On the separator housing
  • Interstage coolers and after coolers : Stainless steel
  • Suction Filter : Micronic

1,829.- + VAT


 

MCH 6/SH Compact - 3.5 cfm Honda Petrol

MCH 6/SH Compact - 3.5 cfm Honda Petrol

 

 

 

  • Charging rate : 100l/min - 6m3/h - 3.5 cfm
  • Filling time cylinder : 10 L - 0-200 Bar 20 min
  • Working pressure : 225 Bar 3200 psi / 300 Bar 4300 psi
  • Rpm pumping unit : 2800
  • Driven by : Honda petrol engine
  • Power : 4 Kw - 5,5 HP @ 3600 giri/min - rpm
  • Fuel consumption : 0,987 L/h / 1,04 quarts/hour
  • Measurements : H 36cm x L 65cm x W 35cm
  • Weight : 54.8 KG
  • Noise Level : 87 dB - ISO 3746
  • Number of stages : 4
  • Number of cylinders : 4
  • Fuel : Unleaded petrol
  • Fuel tank capacity : 2,7 L / 2,85 quarts
  • Lubricating oil capacity : 300 cc (0.3 L) / 10,1 FL. OZ
  • Lubricant : Airtek CE 755 synthetic lubricant
  • Frame : Powder coated steel
  • Oil/Moisture separator : After last stage
  • Filtration : Filter cartridge active carbon and molecular sieve
  • Safety valve : On the separator housing
  • Interstage coolers and after coolers : Stainless steel
  • Suction Filter : Micronic

 

1,894.- + VAT


MCH-11/EM standard, single phase, 7cfm compressor.
  • Charging rate - 195l/min - 11m3/h - 7 cfm
  • Driven by - Single phase electric motor 4 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Noise Level - 78 dB - ISO 3746
  • Weight - 99 KG
  • Measurements - H 63.5cm x L 85.5cm x W 45cm

 

 

4,469.- + VAT

 


MCH 11/EM Compact 230V 50Hz Single Phase
  • Test purge
  • Weight - 141 KG
  • Emergency Stop
  • Noise Level - 78 dB - ISO 3746
  • Charging rate - 195l/min - 11m3/h - 7 cfm
  • Driven by - Single phase electric motor 4 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Variable Pressure switch with auto stop function
  • Measurements - H 63.5cm x L 85.5cm x W 45cm
  • Low oil pressure indicator light
  • Auto drain function
  • Purge on start-up
  • Hour meter

 

 

 

5,568.- + VAT


MCH-16/ET standard, 3 phase, 265L/min, 300bar  compressor    
  • Charging rate - 265l/min - 16m3/h - 9.3 cfm
  • Driven by - Three phase electric motor 5.5 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Noise Level - 82.3 dB - ISO 3746
  • Weight - 109 KG
  • Measurements - H 63.5cm x L 85cm x W 45cm

The MCH 16/ET Standard uses a pumping unit that is made from top quality materials; connecting rods from aluminium alloy, stainless steel intercoolers and aftercooler that are more than four metres in length and cylinders of special cast iron. The three-phase electric motor uses an aluminium housing to keep weight to a minimum this makes the station very compact.

 

 

4,988.- + VAT


MCH 16/ET Compact - 9.3 cfm Three Phase Electric

 

  • Test purge
  • Weight - 151 KG
  • Emergency Stop
  • Noise Level - 81 dB - ISO 3746
  • Charging rate - 265l/min - 16m3/h - 9.3 cfm
  • Driven by - Three phase electric motor 5.5 Kw
  • Working pressure - 225 bar 3200 psi/ 330 bar 4700 psi
  • Variable Pressure switch with auto stop function
  • Measurements - H 84cm x L 89cm x W 60cm
  • Low oil pressure indicator light
  • Auto drain function
  • Purge on start-up
  • Hour meter

Semi-sound proofed filling station. This compressor switches off automatically when the pressure set by the operator is reached. Timed condensate discharge using electromagnetic solenoid valves. The tank mounted on the frame holds the condensate for pollution free disposal. Vibration reduction is achieved by insulating the motor and pumping unit from the frame by means of rubber supports. Special consideration has been given to the cooling of this compressor. The cooling fan diameter has been increased to 440mm and grills on the frame ensure that cooling air flows smoothly through the unit. Oil and filter changing are a simple operation on this compressor.

 

6,212.- + VAT


To get in touch with us please use our Contact/Enquiry form, alternatively the numbers or email below:

Tel :  01348 871938
Mob: 07816 640684